Click to WhatsAppTimber side gates in Heaton Chapel
If your side gate drags across the paving or there’s no gate left between the pillars, send me a photo of the whole opening. I’ll look at what the hinges can fix to and how much room the gate has to swing.
Click to WhatsApp
A wide gate in a shared passage
On one Heaton Chapel job, the front entrance had bare brick pillars and old metal fixings. At the back, the timber gate had rotted and the opening ran at an angle. A straight, off-the-shelf gate would have caught as it opened.
We measured both openings, removed the old front fixings and fitted a gate between the pillars. At the rear we hung a six-foot tongue-and-groove gate, over 1.3 metres wide, from the building. We checked the swing through the passage and fitted a latch and a sliding bolt on the inside.
See both finished gates and the original opening
Questions about side gates in Heaton Chapel
Can you fit a side gate where the opening is angled?
Yes, where there is a suitable fixing point and space for the gate to swing. A photo looking along the passage helps me see the angle. I measure awkward openings before ordering the gate.
Can you reuse the old hinges in brick pillars?
Sometimes. Show me the fixings and the brickwork around them. On this job the old metalwork had to come out before we could fix the new gate.
What affects the quote for a timber gate?
The width, the boarding, the hardware and the condition of the supports all matter. Include a photo of both sides so I can allow for the work around the gate as well as the gate itself.
Show me your gate opening
Send photos from both sides, the rough width and height, and your postcode. I’ll let you know what I can quote from the photos and whether I need to measure on site.
Click to WhatsAppThe Heatons Handyman · HIC Limited